Filter
Top Products
24
VCR Operation (Continued)
Normal Recording
Preparation:
Turn on the power of both the DVD+Hi-Fi VCR and TV.
Tune the TV to the DVD+Hi-Fi VCR output channel (CH 3 or
4) or set the TV’s source selector to VIDEO.
If a direct VIDEO/AUDIO connection is made between the
DVD+Hi-Fi VCR and the TV, set the TV’s source selector to
VIDEO.
11
Insert a video cassette with the anti erasure
safety tab intact.
22
Select the desired channel with
vv
/
VV
.
If you are recording from another source via audio/video
input jacks (at the Rear or Front panel), select LINE1 or
LINE2 with INPUT.
33
Set the desired recording speed (SP or SLP)
with SPEED.
This DVD+Hi-Fi VCR is not designed to record in LP
mode.
44
Set the MTS mode as desired (See page 17, 27).
55
Press REC/ITR (
zz
) once.
Recording will start. (The REC indicator will light in
the display window.)
REC indicator appears only when the Output Source is
set to VCR.
If a cassette with no anti erasure safety tab is loaded,
the cassette will be ejected automatically.
66
Press STOP (
xx
) twice to stop recording.
If the tape reaches the end before STOP (x) is pressed,
the DVD+Hi-Fi VCR will automatically stop, rewind, eject
the tape and turn itself off.
Pausing the recording
1 Press PAUSE/STEP (X) to pause the tape during
recording.
The REC indicator will flash in the display window.
2 When you want to continue recording, press
PAUSE/STEP (X) or REC/ITR (
zz
).
After 5 minutes in Pause mode, the tape will be stopped
automatically to protect the tape and the video heads.
To record one TV program while
watching another
1 Use TV/VCR to select the TV mode while recording.
The TV indicator appears.
2 Using the TV, select the channel to be viewed.
ips
Always use PAUSE/STEP (X) for best results when making
changes while recording.
For example: To change channels while recording, first press
PAUSE/STEP (
X) to put the unit in pause mode. Select the
desired channel on the DVD+Hi-Fi VCR, then press
PAUSE/STEP (X) again to resume recording.
Timer Recording
This DVD+Hi-Fi VCR can be programmed to record up to
8 programs within a period of 1 year. For unattended
recording, the timer needs to know the channels to be
recorded and the starting and ending times.
Preparation:
Turn on the power of both the
DVD+Hi-Fi VCR
and the TV.
Be sure the TV is set to the DVD+Hi-Fi VCR output channel (3
or 4).
Make sure the TUNING BAND in the TUNING menu is set
appropriately (TV or CATV).
11
Press MENU and the MAIN menu will appear.
22
Use
vv
/
VV
to choose the PROGRAM menu.
33
Press MEMORY/ENTER to go to the PROGRAM
menu.
The PROGRAM menu will appear.
If all 8 programs have been entered, FULLY
PROGRAMMED message will appear for a moment
and then PROGRAM 1 will appear on the TV screen.
44
Use
bb
/
BB
to choose the PROGRAM No. (1-8).
55
Use
VV
to choose the MONTH option.
Use
bb
/
BB
to choose the desired month.
66
Use
VV
to choose the DAY option.
Use
bb
/
BB
to choose the desired day.
77
Use
VV
to choose the START option.
Use
bb
/
BB
to choose the desired start time.
88
Use
VV
to choose the STOP option.
Use
bb
/
BB
to choose the desired stop time.
99
Use
VV
to choose the CHANNEL option.
Use
bb
/
BB
to choose the desired channel
(Channel, LINE1 or LINE2).
Cable Users: If you have CABLE TV and used Cable Box
in Connecting Antenna/Cable TV to
DVD+Hi-Fi VCR
(page
11), using a cable box converter, you must set the channel
in this step to match the cable box output channel (usually
CH 3 or 4). Change channels on the cable box instead of
with the
DVD+Hi-Fi VCR
.
If you try to set the program timer before setting the clock,
PLEASE SET THE CLOCK appears for a moment and
then CLOCK menu appears on the TV screen. Set the time
and date before proceeding.
Make sure a tape is in the DVD+Hi-Fi VCR and the anti
erasure safety tab is in place or the tape will be automati-
cally ejected.
Things to know before starting