Kohler K-1703 Universal Remote User Manual


  Open as PDF
of 2
 
PRISTINE
PUMP/CONTROL ACCESS
1-1/2” O.D.
42” (106.7cm)
21”
(53.3cm)
3/4”
(1.9cm)
20-3/8”
(51.8cm)
1/4” (6mm)
3-1/4”
(8.3cm)
60” (152.4cm)
8-7/8” (22.5cm)
1-7/8”
(4.8cm)
2-7/8” (7.3cm)
3” (7.6cm)
PRODUCT INFORMATION
Fixture*: basin area top area weight
Bathing
well
42” (106.7cm) x
26” (66cm)
54” (137.2cm) x
32” (81.3cm)
460 lbs.
(208.7kg)
water depth capacity
To
overflow
15” (38.1cm) 70 gal. (265L)
* Approximate measurements for comparison only.
Product Pump Heater Volt age Frequency Amperage
Neckjets 2HP 1.5 kW 240 V 50/60 Hz 15 A
w/o
Neckjets
1.5 HP 1.5 kW 240 V 50/60 Hz 11 A
REQUIRED ELECTRICAL SERVICE
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or
Earth-Leakage Circuit-Breaker (ELCB):
Pump/control 220/240 V, 20 A, 50/60 Hz
INSTALLATION NOTES
Install this p roduct according to the installation guide.
Floor support under whirlpool must provide for a minimum
of 1500 lbs. (680.4kg)
Hot water supply should be 70% of capacity or greater.
Installations will vary.
No change in measurements if connected with drain
illustrated. (K-7161-AF or K-7161M-AF)
Drop-in cut-out 58-1/2” (148.6cm) x 40-1/2” (102.9cm)
Cut-out for undermount K-583 template
Minimum access panel:
Pump/control 34” (86.4cm) W x
15” (38.1cm) H
required
K-772 -H2, K-772-N1 Pristine
Bath Whirlpool
Page2of2
1019471-4-A
PRODUCT DIAGRAM
 previous