Kramer Electronics 8IR TV Mount User Manual


  Open as PDF
of 2
 
4. Place the assembled T-RC-8IR+ RC-8IR under the dual socket opening.
5. Insert the two screws (supplied with the kit) to fix the T-RC-8IR in place, and tighten
them.
Figure 4: Fix the T-RC-8IR in Place
Connecting the Cables
To connect the cables:
1. Insert the cables to their appropriate connectors from underneath.
2. Secure the cables to the tie holes on the TBUS.
Do not secure the cables too tightly or too loosely. Leave a small amount of slack.
After the unit is connected to mains power and the proper cables, it is ready for use.
KRAMER ELECTRONICS LTD.
Installation
Instructions
MODEL:
T-RC-8IR
Insert Kit for RC-8IR
European Version Only
For the latest information on our products and a list of Kramer
distributors, visit our Web site where updates to these installation
instructions may be found
We welcome your questions, comments, and
feedback.
Web site: www.kramerelectronics.com
E-mail: info@kramerel.com
For more detailed
information regarding
this product scan the
QR code:
P/N: 2900-300060 Rev 4
P/N:
2900-300060
Rev:
4
!
SAFETY WARNING
Disconnect the unit from the power
supply before opening and servicing
 previous