Filter
Top Products
Using Your RGBHV to Component Transcoder
KRAMER ELECTRONICS, LTD.
6
5.3 Converting an RGBHV Source
You can convert an RGBHV signal to Y, B-Y, R-Y, via a FC-14 RGBHV to
Component Transcoder, as the example in Figure 4 illustrates, as follows:
1. Connect the high resolution graphics source to the R, G, B, H/S and V
BNC inputs.
2. Connect the Y, B-Y, and R-Y outputs to the plasma monitor.
3. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity.
4. Press the RGBHV input format selector.
The signal from the RGBHV high resolution graphics source converts and
outputs to the plasma monitor.
5. Switch on the power.
The Power switch illuminates.
Figure 4: Converting from a High Resolution Graphics Source to a Plasma Monitor