Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using Your Universal Room Controller
8
5.1 Operating the RC-8IR
In the following example
1
, that is illustrated in Figure 5, the RC-8IR is
labeled with specific functions and each button is programmed
2
to perform
several tasks
3
as defined in Table 4.
Each button may be assigned with up to 15 commands.
Table 4: The Commands Configuration
The Label The Macro Sequence
ON
Power up the projector
Power up the power amplifier
Power up the DVD player
Power up the video player
Roll down the projector screen
Turn on the speakers
1 minute delay [for the projector to heat up]
Turn lights off
The projector selects the PC input
OFF
Turn lights on
Power down the projector
Power down the power amplifier
Stop the DVD player
Power down the DVD player
Stop the video player
Power down the video player
Roll up the projector screen
Turn off the speakers
DVD
Stop the video player
The projector selects the DVD input
Play the DVD
VCR
Stop the DVD
The projector selects the VCR input
Play the VCR
PC
Stop the DVD
Stop the VCR
The projector selects a PC input
Vol UP
Power amplifier volume up
Vol DOWN
Power amplifier volume down
ON
OFF
DVD
PC
VCR
Vol
UP
Vol
DOWN
HELP
DESK
Figure 5: RC-8IR Labels
Setup
HELP DESK
Call for technical assistance
1 This is only one example among numerous possibilities, each button can be configure as required
2 By the technical installer
3 A macro sequence, including up to 15 commands per button, carried out one after the other