Filter
Top Products
Overview
3
3 Overview
The Kramer TP-551 and the TP-552 constitute a high quality HDMI line
transmitter / receiver system using two STP CAT 5e 24AWG cables
1
. The
transmission range between the HDMI source and the HDMI acceptor can be
extended to up to 60m (200ft)@1080i and 40m (130ft)@1080p.
This transmitter / receiver pair:
Supports up to 1.65Gbps bandwidth
Features enhanced EDID
2
recall - the unit automatically stores and recalls
EDID settings in non-volatile memory from the output
3
, allowing
convenient and reliable connection to the source
Passes the HPD
4
and CEC
5
signals from the source to the display device
using the CAT 5e cables
The TP-551 HDMI Line Transmitter features:
An HDMI input and a pair of RJ-45 CAT 5 output connectors
Three status LEDs (input, output and power)
A high / low output gain selection button
The TP-552 HDMI Line Receiver features:
An HDMI output and a pair of RJ-45 CAT5 input connectors
Three status LEDs (input, output and power)
Four EQ. levels to enhance performance
1 You can also use CAT 6 cables. Using UTP (Unshielded Twisted Pair) might reduce the system range
2 Extended Display Identification Data
3 If an output is not connected, the unit recalls the internal default EDID
4 Hot Plug Detect
5 Consumer Electronics Control