Filter
Top Products
16
VS-66HN - Operating the VS-66HN 6x6 HDMI Matrix Switcher
6.7.1 Connecting the Ethernet Port directly to a PC
You can connect the Ethernet port of the VS-66HN directly to the Ethernet port on
your PC using a crossover cable with RJ-45 connectors.
This type of connection is recommended for identifying the VS-66HN
with the factory configured default IP address.
After connecting the VS-66HN to the Ethernet port, configure your PC as follows:
1. Click Start > Control Panel > Network and Sharing Center.
2. Click Change Adapter Settings.
3. Highlight the network adapter you want to use to connect to the device and
click Change settings of this connection.
The Local Area Connection Properties window for the selected network
adapter appears as shown in Figure 5.
Figure 5: Local Area Connection Properties Window
i