Filter
Top Products
-11-
DC Power Input
Interface Screw-type terminal block
(2 sets for power wire cascading)
DC Jack ( -D 6.3mm / + D 2.0mm)
Operating Input Voltages +7V ~ +30V(+5%)
Power consumption 2.7W max. @7.5VDC input
2.9W max. @24VDC input
3.0W max. @+30VDC input
Basic Information
MAC Addresses Entries 1K
Forwarding Throughput Full wire speed at 100M full duplex
10Mbps - 14,880 pps at 64-byte packets
100Mbps - 148,800pps at 64-byte packets
Forwarding Packet Types Transparent and no modification for
- IEEE 802.3 standard packets
- IEEE 802.1Q VLAN tagged packets
Packet Length Up to 1536 bytes at store-and-forward mode
Flow Control Back-pressure for half-duplex mode
802.3x pause-frame base for full duplex mode
Far End Fault Function Supported on both FX ports
Mechanical
Dimension (base) W 28mm x D 82mm x H 95mm
Housing Enclosed metal with no fan
Mounting Support DIN-rail mounting, Plane mounting
Weight 250g
Environmental
Operating Temperature Typical -10
o
C ~ 55
o
C (model dependent)
Storage Temperature -40
o
C ~ 85
o
C
Relative Humidity 5% ~ 90%