LaCie DVD121 DVD Player User Manual


 
LaCie Dupli Disc DVD121 USB 2.0
User Manual
page 14
Setting Up Your LaCie Dupli Disc DVD121
3.3. Turning Off The LaCie Dupli Disc DVD121
To turn off the LaCie Dupli Disc DVD121, wait
until all duplications have finished, and then push the
On/Off switch on the front of the device.
CAUTION: Do not turn off the LaCie Dupli
Disc DVD121 during duplication. Doing so will
cancel the duplication, render the DVD±R/RW or
CD-R/RW media unusable and may damage the
unit.
Connect the duplicator to your PC or Mac via the
USB 2.0 port on the back of the duplicator.
Scroll to menu 12. USB Mode and press ENT.
1.
2.
3. Switch back to Stand-alone mode. You need to re-
turn to the standalone mode to duplicate discs. From
the above screen, USB LH Mode, press the Down
Arrow. Choose Yes to return to Standalone (SA) or
No to remain connected via USB.
USB LH mode
Back to SA-Mode?
Yes
3.2.1. How to activate USB connectivity on
your duplicator:
12. USB Mode
3. When the USB mode is activated, you will see the
following message (“LH” = link host):
CAUTION: When returning to standalone
mode your duplicator will automatically restart.
Once USB is activated, the top drive will operate as a
standard external DVD burner on your Mac or PC. Use
the bundled software to create CD or DVD masters.
Make sure that you are using the duplicator on a
Hi-Speed USB 2.0 host. Connected to a USB 1.1 host,
the drive will only record CDs at 4x maximum. DVD
recording with USB 1.1 is not possible due to the lim-
ited transfer rate of the USB 1.1 interface.