Filter
Top Products
2
Manual No. 701-168M 11/28/06
Land Pride
Assembly Instructions
■
Head Rest Assembly
Refer to Figure 2:
1. Locate a desirable height and horizontal position
that will protect the driver and passenger heads.
2. Attach headrests (#4) to the back screen with
backing plates (#1), 5/16"-18 x 1" GR5 hex head
cap screws (#2) and flat washers (#3) as shown.
3. Tighten cap screws to 11 ft-lbs.
Back Screen Assembly
Refer to Figure 1:
1. Install bottom joint halves (#1) to the 4-Post
Accessory Bar lower back cross member with
1/4"-20 x 2" GR5 hex head cap screw (#), 2- flat
washers (#5) and nylock hex nut (#4). Do not
tighten nylock nuts.
2. Install top joint halves (#1) to the 4-Post
Accessory Bar upper back cross member with
1/4"-20 x 2" GR5 hex head cap screws (#3), flat
washers (#5) and nylock hex nuts (#4). Do not
tighten nylock nuts.
3. Insert back screen (#2) into the bottom joint
halves and then into the top joint halves.
4. Adjust joint halves to center back screen on the
4-Post Accessory Bar.
5. Tighten nylock nuts to 8 ft-lbs.
Back Screen Assembly
Figure 1
24816
1 8 700-500D JOINT PLATE
2 1 700-514H WELDMENT, BACKSCREEN
3 4 802-152C HHCS 1/4-20X2 GR5
4 4 803-255C NUT HEX NYLOCK 1/4-20
5 8 804-007C WASHER FLAT 1/4 SAE PLT
8 990-246R EDGE TRIM 1/8X7/16 - 75 SERIES
1 701-168M MANUAL, ST TRUCK BACKSCREEN
Kit No. 701-167A BACKSCREEN, TREKER
Item Qty. Part No. Part Description
Headrest Assembly
Figure 2
Kit No. 701-165A HEADREST KIT, FOR BACKSCREEN
1 2 700-523D PLATE, HEAD REST BACKING
2 4 802-738C HHCS 5/16-18X1 GR5 YELLOW DIE
3 4 804-036C WASHER FLAT 5/16 SAE PLT
4 2 840-179C HEADREST W/HARDWARE (Includes items 2 & 3)
1 701-168M MANUAL, ST TRUCK BACKSCREEN
Item Qty. Part No. Part Description
24817