Filter
Top Products
PREPARATION
10
INSTALLATION
DETACHMENT
ᯫ
Image shown may differ from your TV.
!
NOTE
Ź When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
Assemble the parts of the STAND BODY
with the STAND BASE of the TV. At this
time, tighten the screws that hold the
STAND BODY on.
3
Assemble the TV as shown.
4
Assemble the part of the STAND REAR
COVER with the TV.
5
Install the 4 screws into the holes shown.
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
Remove the screws that hold the stand on.
3
Detach the STAND REAR COVER from TV.
4
Detach the stand from TV.
STAND INSTRUCTIONS
(For 26/32/37/42/47/55LE5300, 26LE5500, 42/47/55LE530C, 42/47/55LE530C)
STAND BASE
STAND BODY
STAND REAR
COVER
M4 x 16
M4 x 14
26LE5300,
26LE5500
Other models
M4 x 22 (32LE5300)
M4 x 24 (37/42LE5300, 42LE530C)
M4 x 26 (47/55LE5300, 47/55LE530C)
M4 x 20
26LE5300,
26LE5500
or
Tighten the two of these four
screws and the two Torx plus
star head screws (provided as
parts of the TV) to secure the TV. Tighten
the two Torx plus star head screws with a
star head driver bit (not provided as parts
of the TV).
x 2
x 2
(For 42/47/55LE530C)
Downloaded From TV-Manual.com Manuals