Filter
Top Products
6.1 Adjustment of RF/AV/S-VIDEO
* Required Equipments
- Remote controller for adjustment
- MSPG-925F Pattern Generator (Which has Video Signal:
100% Color Bar Pattern shown in Fig. 1)
=> Model: 202 / Pattern: 33
Case1) EC and FC model use PAL-BGDHI (composite signal)
6.1.1 Method of Auto RF/AV/S-VIDEO Color Balance.
1) Input the Video Signal: 100% Color Bar signal into AV4
2) Set the PSM to Dynamic mode in the Picture menu
[Fig.1]
3) Press IN-START key on R/C for adjustment.
4) Press the
(Vol.+) key to operate the set, then it becomes
automatically.
5) Auto-RGB OK means the adjustment is completed.
6.2 Adjustment of Component.
* Required Equipments
- Remote controller for adjustment
- l MSPG-925F Pattern Generator => Model: 217/Pattern: 33
(Which has 720p/60Hz YPbPr output Pattern shown in Fig. 2 )
6.2.1 Method of Auto Component Color Balance
1) Input the Component 720p/60Hz 100% Color Bar(MSPG-
925F model:217, pattern:33) signal into Component.
2) Set the PSM to Dynamic mode in the Picture menu
[Fig.2]
3) Press the IN-START key on R/C for adjustment.
4) Press the (Vol.+) key to operate the set , then it becomes
automatically.
5) Auto-RGB OK means the adjustment is completed.
6.3 Adjustment of RGB
* Required Equipments
- Remote controller for adjustment
-l MSPG-925F Pattern Generator
(Which has XGA [1024*768] 60Hz 100% Color Bar pattern
shown in Fig. 3)
6.3.1 Method of Auto RGB Color Balance
1) Input the PC 1024x768@60Hz 100% Color Bar pattern
(MSPG-925F model:37, pattern:33) into RGB.
(Using D-sub to D-sub cable)
2) Set the PSM to Dynamic mode in Picture menu.
3) Press the IN-START key on R/C for adjustment
[Fig.3]
4) Press the
(Vol.+) key operate To set , then it becomes
automatically.
5) Auto-RGB OK means adjustment is completed.
Before White-balance, the AV ADC should be done.
7. White Balance
=> Caution: - System control RS-232 Host should be "PC" for
adjustment.
- AV ADC should be done before White-balance.
* Test Equipment
Color Analyzer ( CA-110)
PC (for communication through RS-232C) => UART Baud
rate : 115200
Pattern Generator (MSPG-925F)
* Target Value (PSM: Dynamic, CSM: Normal)
- Normal(9300K) x:0.283±0.003, y: 0.298±0.003
- Luminance(Y) AV/COMP: 250 Cd/m2 (Typ: 300 Cd/m2)
PC : 300 Cd/m2 (Typ: 350 Cd/m2)
-> Reference Value(Automatically fixed)
- Cool(11000K) - x: 0.274±0.003, y: 0.286±0.003
- Warm(7200K) - x:0.303±0.003, y: 0.319±0.003
- 15 -
White balance AV4
MSPG925F High Model : 202
*239Gray Pattern : 47
*Pal Video