Filter
Top Products
48 ENTERTAINMENT
ENTERTAINMENT
Network Connection
Connecting to a wired network
Connect the TV to a local area network (LAN) via
the LAN port as shown in the following illustration
and set up the network settings.
If wired and wireless networks are both available,
wired is the preferred method.
After making a physical connection, a small
number of home networks may require the TV
network settings to be adjusted. For most home
networks, the TV will connect to automatically
without any adjustments.
For detail information, contact your internet
provider or router manual.
I
J
Intemet
CAUTION
Do not connect a modular phone cable to the
LAN port.
Since there are various connection methods,
please follow the specifications of your
telecommunication carrier or internet service
provider.
After connecting the LAN port, use the
Premium or LG Apps menu.
To set up the network settings: (Even if your TV
has already connected automatically, running
setup again will not harm anything)
1 Press Home to access the Home menu.
2 Press the Navigation buttons to scroll to
SETUP and press ENTER.
3 Press the Navigation buttons to scroll to
NETWORK and press ENTER.
4 Press the Navigation buttons to select
Network Setting and press ENTER.
5 If wired and wireless are simultaneously
connected, press the Navigation buttons to
select Wired and press ENTER.
6 If you have already set the Network Setting,
select Resetting. The new connection settings
will reset the current network settings.
7 Select IP Auto Setting or IP Manual Setting.
- If selecting IP Manual Setting, press the
Navigation and Number buttons. IP addresses
will need to be input manually.
- IPAuto Setting: Select this if there is a DHCP
server (Router) on the local area network
(LAN) via wired connection, the TV will
automatically be allocated an IP address. If
you're using a broadband router or broadband
modem that has a DHCP (Dynamic Host
Configuration Protocol) server function. The
IPaddress will automatically be determined.
- IP Manual Setting: Select if there is no DHCP
server on the network or you want to set the
IPaddress manually.
8 When you are finished, press EXIT.
Downloaded From TV-Manual.com Manuals