Filter
Top Products
ENGLISH
15
ASSEMBLING AND PREPARING
Attaching the TV to a desk
The TV should be attached to a desk so it cannot be
pulled in a forward/backward direction, potentially
causing injury or damaging the product.
TYPE 1
4-Screws
(Not provided as parts of the product)
Desk
Stand
NOTE
Screw: M5 x L (*L: Table depth + 8~10 mm) ex)
Table depth: 15mm, Screw: M5 x 25
TYPE 2
2-Screws, 2-Washers, 2-Nuts, 4-Rubbers
(provided as parts of the product)
Desk
Stand
Adjusting the angle of the TV to suit view
(Depending on model)
The swivel angle is adjustable. If no adjustment screw
(M6 X 10) is used, the swivel angle is ±90°.
Installing the adjustment screw in the B position will
restrict the swivel angle to ±45°, and installing the
adjustment screw in the A position will restrict the
swivel angle to ±20°.
Installing an adjustment screw in the A and B positions
will restrict the swivel angle to ±20°.
(Basically, only one screw (M6 X 10) is provided for fixing
swivel.)
90˚90˚
B
A
When adjusting the angle of the TV, watch out for
your fingers.
- Personal injury may occur if hands or fingers are
pinched. If the product is tilted too much, it may
fall, causing damage or injury.
CAUTION