LG Electronics 39LP645H CRT Television User Manual


 
12
206-4232
EZ-Manager Wizard (Cont.)
Initiate Conguration or Exit the EZ-Manager Wizard
The Welcome screen provides a brief introduction to the EZ-Manager wizard.
EZ-Manager Wizard
Welcome to LG’s EZ-Manager Wizard
• Use this setup wizard to congure the TV for Pro:Centric and/or Free-
To-Guest (FTG) operation.
Select ‘Next’ to continue.
• If a Pro:Centric Server will not be installed and/or you do not wish to use
the wizard to congure this TV for FTG Mode, you may exit the wizard.
Select ‘No Pro:Centric’ to disable the Pro:Centric feature of this TV, or
select ‘Exit’ to quit.
This setup wizard will start automatically in 10 seconds.
Exit
Next
No Pro:Centric
Note: If there is no user action in this screen within 10 seconds, the wizard will proceed to the
rst conguration step. Once the wizard has proceeded, it is not possible to return to the Welcome
screen; however, if you simply wish to exit the wizard, you can do so by selecting the “Exit” option
from the subsequent screen(s).
Note: As indicated on the previous page, you may use the LG Smart Install feature to congure
the TV using a USB memory device at any time while the EZ-Manager Wizard is in progress.
However, if you want to use the TV Zoning feature for location-specic conguration purposes,
proceed to the EZ-Manager’s Zone, Label, and Room Number screen and assign the appropriate
TV Zone # for this TV before inserting your USB device. See “TV Conguration Options” on the
following page for further information.
From the Welcome screen, you have the following options:
• To proceed with the EZ-Manager Wizard, use the arrow keys on the Installer Remote to select/
highlight Next and press OK. Then, continue to the “TV Conguration Options” section on the
following page.
• To exit the wizard, but retain the use of the Pro:Centric feature of this TV (i.e., Installer Menu
item 119 DATA CHANNEL set to 255) in the future, use the arrow keys on the Installer Remote
to select/highlight Exit and press OK. In the conrmation pop-up window, select OK, and then
press OK once more on the Installer Remote.
• If you do not intend to install a Pro:Centric server on this system and you do not wish to use
the wizard’s Zoning or USB conguration options, exit the wizard as follows: Use the arrow
keys on the Installer Remote to select/highlight the No Pro:Centric option. This will disable the
Pro:Centric feature of this TV (i.e., Installer Menu item 119 DATA CHANNEL will be set to 0) and
exit the wizard. In the conrmation pop-up window, select OK, and then press OK once more on
the Installer Remote.