Filter
Top Products
ASSEMBLING AND PREPARING 29
Mounting on a table
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (4 inch) (minimum) space from
the wall for proper ventilation.
10 cm(4 inches)
2 Connect the power cord to a wall outlet.
i_, _ CAUTION
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
(For 32CS460, 32CS461,42CS530,
32/37/42CS560, 32/42LS3400, 32LS3410,
32/42LS3450, 32LS3500, 32LS3510, 47LS4500)
Fix the TV to a table to prevent from tilting
forward, damage, and potential injury.
Mount the TV on a table, and then insert and
tighten the supplied screw on the rear of the
stand.
'_---_ WARNING
• To prevent TV from falling over, the TV
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause injury.
(Depending on model)
Swivel 20 degrees to the left or right and adjust
the angle of the TV to suit your view.
20°
- _ CAUTION
• When adjusting the angle of the TV,
watch out for your fingers.
- Personal injury may occur if hands or
fingers are pinched. If the product is
tilted too much, it may fall, causing
damage or injury.