Filter
Top Products
33
206-4263
Custom Master TV Setup (Cont.)
Custom Master TV Setup Procedure
1. Turn ON the TV.
The next step depends on whether the EZ-Manager Wizard appears on
the screen when you turn ON the TV:
• If the wizard is displayed, the TV is in the required factory default state.
Exit the wizard, and then continue with step 2.
• If the wizard is not displayed, restore the TV to a factory default
condition before continuing with this procedure. See Reference section,
“Restoring Factory Defaults on the TV(s),” as necessary, for further
information.
2. Set Installer Menu items.
This step provides specic instruction only on the Installer Menu items
that should be set on a Master TV. Refer to pages 22 to 31 for detailed
information on all Installer Menu items.
a) Use the Installer Remote to access the PTC Installer Menu (see
“Accessing the Installer Menu” on page 22 for further information).
b) Set Installer Menu item 003 BAND/AFC, as appropriate.
• Broadcast: Set to 0. • HRC: Set to 2.
• CATV: Set to 1 (default). • IRC: Set to 3.
c) Set any other Installer Menu items that affect your TV programming
network to the required conguration. For example, enable/disable
Aux inputs, set a Start Channel, etc.
If you intend to use a TLX le for cloning purposes, you may also
congure selected settings in the IP Environment Menu (accessible
from the Installer Menu). See “IP Environment Setup” on pages 53 to
60 for further information. In particular, if you intend to use the Wi-Fi
Zoning feature, you must congure the wireless network connection
as part of the Master TV Setup. However, note that you cannot return
directly to the Installer Menu from the IP Environment Menu; thus, you
may wish to set all Installer Menu items as needed before you access
the IP Environment Menu. Otherwise, you will need to reaccess the
Installer Menu to set additional items.
d) After you have adjusted all Installer Menu item settings as required,
press OK once on the Installer Remote to save your changes; then,
press OK again to exit the menu.
Typical Installer Menu
Adjust the values for these
Installer Menu items, as required.
xxLY750H PTC INSTALLER MENU
CPU-CTV
000 INSTALLER SEQ 000
UPN 000-000-000-000 ASIC D279
PTC V1.00.015 CPU V3.11.00
117 FACT DEFAULT 000
003 BAND/AFC 001
(Continued on next page)