Filter
Top Products
WATCHING TV / CHANNEL CONTROL
34
WATCHING TV / CHANNEL CONTROL
TURNING ON TV
WATCHING TV / CHANNEL CONTROL
NOTE
!
GG
If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
GG
If you unplug the TV once or turn the main power off, the clock function reset.
First, connect power cord correctly.
At this moment, TV is in standby mode.
■
In standby mode to turn TV on, press the
IINNPPUUTT
,
CCHH ((
DD
or
EE
))
button on the TV or press the
PPOOWWEERR
,
IINNPPUUTT
,
CCHH((
or
))
,
NNuummbbeerr ((00
~
99))
button on the remote control.
Select the viewing source by using the
IINNPPUUTT
button on the remote control.
■
This TV is programmed to remember which power state it was last set to, even if the power cord is out.
1
2
Press the
CCHH ((
or
))
or
NNUUMMBBEERR
buttons to select a channel number.
1
VOLUME ADJUSTMENT
CHANNEL SELECTION
Adjust the volume to suit your personal preference.
Press the
VVOOLL ((++
or
--))
button to adjust the volume.
If you want to switch the sound off, press the
MMUUTTEE
button.
You can cancel the Mute function by pressing the
MMUUTTEE
or
VVOOLL ((++
or
--))
button.
1
2
3
Turning on TV just after installation
Turning on TV in use
(power cord is still connected)
Case 1)
Press the
PPOOWWEERR
button on the remote control. The TV reverts to standby mode.
- To turn TV on, press the
IINNPPUUTT
,
CCHH ((
DD
or
EE
))
button on the TV or press the
PPOOWWEERR
,
IINNPPUUTT
,
CCHH ((
or
))
,
NNuummbbeerr ((00
~
99 ))
button on the remote control.
You can press the main power to shutdown the TV from standby mode to use even less power that
standby mode.
Case 2)
Main power( ) on the TV is switched off.
- To turn TV on, you must press the main power ( ) button on the TV.
Case 3)
Press the
PPOOWWEERR
button on the remote control and then main power( ) on the TV is switched off.
- To turn TV on, you must press the main power ( ) button on the TV.