Filter
Top Products
ENGLISH
14
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Setting up the TV
You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment
center or other furniture.
Attaching the Stand
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
y
When attaching the stand to the TV set, place the screen facing down on a cushioned table or
flat surface to protect the screen from scratches.
y
Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the
TV may tilt forward after being installed.)
y
Do not tighten the screws with too much force; otherwise they may be damaged and come
loose later.
CAUTION
y
Remove the stand before installing the TV on a wall mount by performing the stand attachment
in reverse.
NOTE
Mounting on a Table
1
Lift and tilt the TV into its upright position on
a table.
- Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
2
Connect the power cord to a wall outlet.
1
2
M4 x 14
2 EA
M4 x 14
2 EA
Stand Base
3
Stand Base
1
2
1
Attach the stand to the TV using the upper
mounting hole on the back of the TV.
2
Attach the stand to the TV using the lower
connection on the back of the TV.
y
Be sure to attach the upper mounting hole first,
and then attach the lower connection second.
NOTE