Filter
Top Products
Installation
When RGB connect to PC input and select the RGB-PC. this function is used.
- When HDMt/DVI connect to PC input and select HDMI/DW input, this function is used.
- After connecting RGB-PC or HDMI/DVt to PC input and checking the screen quality.
* Adjustment for screen Resolution, Position, Size, and Phase
I
\
-zPc IZSOUND SAP CO
Position This function is to adjust
picture to left/right and
up/down as you prefer.
Size This function is to minimize
any vertical bars or stripes
visible on the screen back-
ground. And the honzonta,
screen size will also
cnange.
Phase This function allows you to
removeany horizontalnoise
and clear or snarpen the
imageof characters.
Resolution This function allows you
select Resolution of
XGA/WXGA.
1 Dressthe ADJUST button and then use & / T buttonto select
Resolution. POSITION.SIZE.or PHASE.
2
Press ENTER button and then use A /T 4 H buttons to
make appropriate adjustments.
- The PHASE adjustment range is -16 - +16.
IIn HDMI/DVI-PC mode. PHASE is not avalable.}
oThe SIZE adjustment range is -30 - +30
In HDMI/DVI-PC mode. SIZE is not available.,
3 Dress ENTER button.
* When you change the resolution, select the proper resolution
in present input to see the beet picture appearance,
" initializing (Reset to original factory values)
I - 9 1
EZPIC EZSOUNDSAP
To initialize the adjusted values 1 _ress the ADJUST 3utton and then use A /_ button to select
the RESET option
D
2 ress ENTER button and then use _1 / _ button to select Yes.
D
3 ress ENTER button.
28