Filter
Top Products
15
Preparation
Audio/Video Connection
The picture and sound of a nearby TV, VCR, or radio may be
distorted during playback. If this occurs, position the player away
from the TV, VCR, or radio, or turn off the unit after removing the
disc.
DVD Player Connections
Depending on your TV and other equipment there are various
ways you can connect the player. Please refer to the manuals of
your TV, stereo system or other devices as necessary for
additional connection information.
Video and Audio Connections to Your TV
Make sure the DVD player is connected directly to the TV and not
to a VCR, otherwise the DVD image could be distorted by the
copy protection system.
Video:
Connect the VIDEO jack on the DVD player to the video in jack on
the TV using the video cable.
Audio Connection to Your TV:
Connect the AUDIO jacks of the DVD Player to the audio left and
right IN jacks on the TV using the audio cables. Do not connect
the DVD Player’s AUDIO OUT jack to the phone in jack (record
deck) of your audio system.
You must set the A/V IN/OUT switch to the “A/V OUT” mode