LG Electronics DVX642H DVD Player User Manual


 
System Setting14
System Setting
3
[AUDIO] Menu
Dolby Digital / DTS / MPEG
Set the unit’s Audio options according to various
disc output type you use.
Sample Freq. (Frequency)
Selects the sampling frequency of the audio signal
between [48 kHz] and [96 kHz].
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [On] for this eect.
Vocal
Set to [On] only when a multi-channel karaoke DVD
is playing. The karaoke channels on the disc mix
into normal stereo sound.
[LOCK] Menu
Firstly, you have to create the 4-digit password on
[Area Code] to use the LOCK menu.
If you forget your password you can reset it. First,
remove the disc in the unit. Display setup menu
then input the 6-digit number “210499”. The “P CLr”
appear in the display window and the password is
deleted.
Rating
Select a rating level. The lower the level, the stricter
the rating. Select [Unlock] to deactivate the rating.
Password
Sets or changes the password for lock settings.
Area Code
To input the standardized area code referring the
Area Code List on page 20.
[OTHERS] Menu
B.L.E (Black Level Expansion)
To select the black level of playback pictures, set
your preference and monitor’s ability.
REC Bitrate
You can choose a bit rate for USB direct recording.
Higher bit rate gives the better sound quality but
uses more space on the USB Flash Drive. For USB
direct recording, see page 17.
DivX(R) VOD
ABOUT DIVX VIDEO: DivX® is a digital video format
created by DivX, Inc. This is an ocial DivX Certied®
device that plays DivX video. Visit divx.com for more
information and software tools to convert your les
into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certied® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX
VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete
your registration.
[Register]: Displays the registration code of
your unit.
[Deregister]: Deregister your unit and display
the deregister code.