LG Electronics HCS5650 TV Receiver User Manual


 
1.772" 0.205"
9.724"
13.949"
5.217"
5.217"
10.551"
LG Electronics USA, Inc.
Commercial Products Division
2000 Millbrook Drive, Lincolnshire, IL 60069
Contact your Regional Sales Manager Toll-Free: 1-877-793-6484
Customer Service: 1-888-865-3026
Zenith-brand products are sold and serviced by LG Electronics USA, Inc.
All screen images are simulated. Dimensions and weights are approximate. Design, specifi cations, and features subject to
change without notice. © Copyright 2008 LG Electronics USA, Inc. All Rights Reserved. The lightning bolt ‘z’ is a registered
trademark of Zenith Electronics Corporation. Pro:Idiom is a trademark of Zenith Electronics Corporation. Peerless is a regis-
tered trademark of Peerless Industries, Inc. All other trademarks are property of their respective owners.
Printed in the USA. January 2008
www.zenith.com
www.LGcommercial.com
DIMENSIONS
FEATURES
RS-232C Input for compatibility with AV Control
systems.
Built-in ATSC/NTSC/QAM Clear tuner gives tuner
capability for use with LG’s LCD monitor models.
Time and cost-saving cloning option allows installers
a quick and easy transfer (cloning) of settings to
multiple HCS5650’s in a fraction of the time.
HDMI™ with HDCP output from the HCS5650 to the
LCD monitor. Backward compatible with monitors
with DVI input via HDMI™-DVI Cable (not provided).
(Note: If using HCS5650 with an LG brand monitor, Owners
Manual includes instructions for changing the input to HDMI™).
INSTALLERS
Zenith “Setup Remote” model #124-213-07 (sold sepa-
rately) is required to confi gure the HCS5650.
Zenith QuickSet II “Clone” Programmer model LT2002
(sold separately) is required for cloning.
HCS5650
INTERACTIVE SYSTEM PROVIDER INTERFACE BOX WITH INTEGRATED HD TUNER
LG Electronics USA, Inc.
194 41_ HC S5650_ 010908
PILLOW JACK IN
(12V DC 40mA )
REMOTE
IN
AUDIO IN AUDIO OUT
AUX
CONTROL
12
DIGITAL
VIDEO IN
DIGITAL
VIDEO OUT
DIGITAL AUDIO
OUT (OPTICAL)
DISPLAY
CONTROL
RS-232C
AC OUT AC IN
MAX 8A 9 60W AC 120V ~ 60Hz
PILLOW INT
ANTENNA
CABLE
MPI
TECHNICAL SPECIFICATIONS
Product Dimensions (D×W×H)
9.7"×13.9"×1.8"
Weight
7.7 lbs.
Carton Dimensions (D×W×H)
14.9"×17.5"×5.1"
Shipping Weight
7.9 lbs.
UPC Code
044642702526
Connector (MPI)
Standard RJ-11
Able to Address Up To
1 Display
Computer Requirements
Control Software and Standard Serial (RS-232) Interface
Source Selection
Any valid input source
Command Set
Digital MPI – Power On, Power Off, Volume Up, Volume
Down, Set Maximum Volume, Set Minimum Volume.
Request TV Status
Signal Strength, Power Status, TV Volume Level,
Channel Number
Rating AC 100-240V~50/60Hz, 40W
AC Input AC 120V~60Hz, Max. 8A
AC Output AC 120V~60Hz, Max. 8A
INPUTS
Digital Video
2 HDMI Inputs
Audio 3.5mm Stereo Jack
MPI (on Superport card) RJ-11 Modular Jack
Service
RS-232C ( 9-pin D-Sub Male)
Remote In 3.5mm Jack (for IR Receiver)
OUTPUTS
Digital Video
1 HDMI Out
Audio 3.5mm Stereo Jack (use with DVI)
Digital Audio
Digital Audio Out (Optical) SPDIF
Display Control
RS-232C 9-pin D-Sub Female
Aux Control
3.5m
m jack
Limited Warranty 1 year (parts/labor)
INCLUDED IN CARTON
HCS5650 ISP Interface Box with Integrated HD Tuner
Installation and Operating Guide
15" AC Power Cord (UL Hospital Grade Approved)
3 ft. AC Power Cord (UL Hospital Grade Approved)
15 ft. RS-232C M-to-F Cable (HCS5650 to Monitor/TV)
5 ft. RS-232C M-to-M Null Modem Cable (LCD Monitor)
5 ft. HDMI
Cable (HCS5650 to HDMI
on Monitor/TV)
Five (5) brackets with screws for attachment to HCS5650
Five (5) screws for attaching the HCS5650 to a wall
[M = Male, F = Female]
OPTIONAL MOUNTS/ACCESSORIES
Peerless
®
Wall Mount PWMT300
PWMT300-AC1 Peerless
®
Accessory for PWMT300
124-213-08 Patient Remote Control
124-213-07 Installer/Setup Remote Control
LT2002 Clone Programmer