Filter
Top Products
System Setting
27
System Setting
3
Editing Programme List
(Channel Edit)
You can remove any digital TV or radio programs
stored on this recorder using the [Channel Edit]
menu.
1. Display [Setup] menu.
2. Use
W/S
to select [DTV], and press ENTER
(
b
).
3. Use
W/S/A/D
to select [Channel Edit] and
press ENTER (
b
).
4. Press
W
to select [DTV] and use
A/D
to select
[DTV] or [Radio] programme list.
5. Use
W/S/A/D
to select a programme you
want to skip from the list, and press red (R)
coloured button.
If you do not want to skip the programme,
select the programme and press red (R)
coloured button again.
Use
W/S/A/D
to select a programme you
want to lock from the list, and press blue (B)
coloured button.
If you do not want to lock the programme,
select the programme and press blue (B)
coloured button again.
6. Press BACK (
1
) to return to the previous step.
Skip : If the programme is assigned to skip, you
can’t select that programme with PR button in
Remote control.
Block/unblock : If the programme is assigned
to block and [DTV Lock] in the [Setup] menu is
set to [Lock], you should enter the password to
watch the programme.
Setting the DTV Lock
Allows you to activate or deactivate all of the lock
schemes previously set. When the [DTV Lock] is set
to [Unlock].
1. Display [Setup] menu.
2. Use
W/S/A/D
to select [LOCK] and press
ENTER (
b
).
3. Use
W/S
to select [DTV Lock] and press ENTER
(
b
).
4. Input the password using numerical buttons.
If you have not set your password yet, input
“1111” and press ENTER (
b
).
5. Use
W/S
to select [Lock] and press ENTER (
b
)
to activate the DTV Lock.