Filter
Top Products
20
Color TFT LCD Module is very sensitive both electrically and physically.Users, therefore,
are requested to follow the “Guidance of handling color TFT LCD Module” on the followings.
Guidance of handling Color TFT LCD Module
1
Be careful not to make scratch
on the polarizer.
- Surface of polarizer is soft and can be
physically damaged easily.
- Please do not touch, push or rub polarizer
surface with materials over HB hardness.
2
Keep clean the surface.
- Please wear rubber glove when touch the
surface of LCD screen.
- Please use soft and anti-static material
with n-Hexane as cleaner.
3
Keep out of water.
- Water on/in the LCD may cause electrical
short or corrosion.
- Please wipe out or dry water carefully.
4
Prevent swift Temperature
& Humidity change.
- Swift temperature and/or humidity change
can make dew or ice which cause
nonconformance such as malfunction.
5
- LCD is not proper to be used at high temp-
erature and high humidity.
- Please keep specified temperature and
humidity condition.
6
Keep out of Corrosive Gas.
- Corrosive gas effect the polarizer and the circuit
chemically and cause defects accordingly.
7
Electrostatic discharge can make damage
- There are electro-static sensitive components such as
CMOS in LCD Module.
- Please earth human body when handle the LCD.In addition,
please do not touch the interface connector pin with bare
hand.
High temperature & high humidity
reduce the life-time.
8
Do not operate for a long time under
the same pattern.
- Operating LCD for a long time under the same pattern
can cause image persistence and can damage it.
- Please follow following guidance.
1. Turn the power off when do not use.
2. Change the pattern periodically.