Filter
Top Products
42
Timer Recording (Continued)
Checking Timer Recording Details
Programming can be checked whenever the DVD
Recorder is turned on. Press TIMER REC twice.
• Use v / V to select a timer recording.
• Press ENTER to edit the selected program.
Timer Record menu appears.
• Press CLEAR to delete the selected program
from the Timer Record List.
Canceling a Timer Recording
You can clear a timer setting anytime before the record-
ing actually starts.
• Use v / V to select a program you want to erase on
the Timer Recorder List. If you want to erase the
program, press CLEAR.
Stopping a Timer Recording in Progress
After a timer recording has started, you can still cancel
the program.
• Press POWER.
Timer Recording Troubleshooting
Even though the timer is set, the recorder will not
record when:
• There is no disc loaded.
•Anon-recordable disc is loaded.
• Disc Protect is set to ON in the Setup menu
(see page 28).
• Power is turned on.
• There are already 99 titles recorded on the disc.
You cannot enter a timer program when:
•Arecording is already underway.
• The time you’re trying to set has already passed.
• There are already 7 timer programs set.
If two or more timer programs overlap:
• The earlier program takes priority.
• When the earlier program finishes, the later program
starts.
• If two programs are set to start at exactly the same
time, the program entered first takes priority.
If the disc is damaged, the recording may not complete
successfully. In this case even though the Check field
shows “Rec. OK”, it may not be.
Date Start Time Length Mode Check
Timer Record List
Edit CloseTimer Rec
TIMER REC
Delete
CLEAR
10/4 Sa
PR
5 19:20 30M LQ Off Rec. OK
10/6 Sa5 19:20 50M HQ Off Rec. OK
PDC