Filter
Top Products
A33
Connecting the cable
Connect the RS-232C cable
as shown in the picture.
* The RS-232C protocol is used for communication between the PC and monitor. You can
turn the monitor on/off, select an input source or adjust the OSD menu from your PC.
Baud Rate : 115200bps
Data Length : 8bits
Parity Bit : NONE
Stop Bit : 1bit
Flow Control : NONE
Use this method to connect several monitors to a single PC.
You can control several monitors at a time by connecting them to a single PC.
Communication Parameter
IN
OUT
IN
OUT
IN
OUT
OUT
RS-232C Cable
(not included)
Monitor
PC
Controlling the Multiple Monitors