LG Electronics DVT418 DVD Player User Manual


 
23
Operation
Playing a DVD
PLAYBACK SETUP
1. Turn on the TV and select the video input source
connected to the DVD/CD receiver.
2. Turn on the audio system (if applicable) and select
the input source connected to the DVD/CD
receiver.
3. Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the
playback side down.
4. Press OPEN/CLOSE to close the tray. Playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
instead:
Use the bB v Vbuttons to select the title/chapter
you want to view, then press ENTER to start.
Press TITLE or MENU to return to the menu
screen.
Use the
11 22 33 44
buttons to select an option you
want, then press ENTER to view the option.
Notes:
If parental control is set and the disc is not within
the rating settings you must input the password.
(See “Lock Menu” on page 21).
DVDs may have a region code. Your receiver does
not play discs that have a region code different from
your receiver. The region code for this receiver is 1
(one).
General Features
Note:
Unless stated otherwise, all operations described
use the remote control. Some features may also be
available on the Setup menu.
MOVING TO ANOTHER TITLE/GROUP
When a disc has more than one title/group, you can
move to another title/group. Press DISPLAY while
playback is stopped then the appropriate number (0-9)
or use b / B to move to another title/group.
You can play any title by inputting its number while
playback is stopped.
MOVING TO ANOTHER CHAPTER/TRACK
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to
another chapter/track as follows:
Press SKIP . or > briefly during playback to
select the next chapter/track or to return to the
beginning of the current chapter/track.
Press SKIP . twice briefly to step back to the
previous chapter/track.
•To go directly to any chapter during DVD playback,
press DISPLAY and press v / V to select the
chapter/track icon. Then, input the chapter/track
number or use b / B.
SEARCH
1. Press and hold SKIP/SCAN . or > for about
two seconds during playback.
The receiver will now go into SEARCH mode.
2. Press and hold SKIP/SCAN . or >
repeatedly to select the required speed:
X2, X4, X16 or X100
3. To exit SEARCH mode, press PLAY.
Note:
When using a DVD audio disc that includes
pictures, this operation may be permitted in some
picture segments.
DVD-ADVD-V
DVD-ADVD-V
DVD-ADVD-V
DVD-A
DVD-V
Operation