LG Electronics MT-42PZ41R Flat Panel Television User Manual


 
22
Watching PIP (RGB1, RGB2 mode only)
- PIP lets you view 2 different inputs (sources) on your monitor screen at the same time. One source will be large, and the
other source will show a smaller inset image.
- When you select PC for main picture in PIP, you can watch Video (or AV1, AV2), S-Video or Component 480i for sub picture.
- If you turn on PIP while viewing Component, Video (or AV1, AV2) or S-Video, these sources are changed to sub picture input
source and main picture source is changed to PC (RGB1, RGB2).
- If PIP doesn’t work, select PC (RGB1, RGB2) for main picture in PIP and then check it whether PC signal input into the
monitor.
PIP (Picture-in-Picture) Feature
Press the PIP button to show the sub picture.
Each press of PIP button or
FF
/
GG
button changes the screen display as shown below.
Moving the PIP
Press the PIP POSITION button in the PIP mode.
Each press of the PIP POSITION button will move the
sub picture to a different position on the screen in a
clockwise direction.
PIP
FF GG
PIP (S)
PIP
FF GG
PIP (L)
PIP
FF GG
Off
Selecting a Input Signal Source for the PIP
Press the PIP INPUT button to select the input source for
the sub picture.
Each press of PIP INPUT button or
FF
/
GG
button
changes the screen display as shown below.
Selecting PIP Sound Options
Press the SOUND SELECT button to select main image
sound (
Sound(M)
) or PIP (inset image) sound
(
Sound(S)
).
Each press of SOUND SELECT button or
FF
/
GG
button
changes the screen display as shown below.
Sound(M) Sound(S)
Using Sub picture Still Function
1. Press the PIP STILL button in the PIP mode.
In PIP or TWIN PICTURE modes, the sub (inset) pic-
ture is frozen.
Frozen picture is released automatically after about 10
minutes.
If still picture is on the screen for more than 5 minutes,
the image becomes dark. If another function is activat-
ed, normal screen brightness is restored.
2. To return to normal viewing, press the PIP STILL but-
ton again.
Main Picture Sub Picture
Video
or
(AV1) S-Video
Component
or
(AV2)