Filter
Top Products
23
Twin Picture Setup Options
Watching Twin Picture
- As the name suggests, this mode splits the screen into 2, allowing 2 sources to be shown on the monitor screen at the
same time. Each source is given half the screen.
- When you select PC for main picture in twin picture, you can watch Video (or AV1, AV2), S-Video or Component 480i for
sub picture.
- If you turn on twin picture while viewing Component, Video (or AV1, AV2) or S-Video, these sources are changed to sub pic-
ture input source and main picture source is changed to PC (RGB1, RGB2).
- If twin picture doesn’t work, select PC (RGB1, RGB2) for main picture in twin picture and then check it whether PC signal
input into the monitor.
- In wide VGA (848x480, 852x480), twin picture mode is not available.
Use the TWIN PICTURE button.
• Each press of the TWIN PICTURE button or
FF
/
GG
button cycles through the screen displays shown below.
Selecting a Input Signal Source for the Twin Picture
Press the PIP INPUT button to select the input source for the sub picture.
• Each press of PIP INPUT button or
FF
/
GG
button changes the screen display as shown below.
Selecting Twin Picture Sound Options
Press the SOUND SELECT button to select main image
sound (
Sound(M)
) or PIP (inset image) sound
(
Sound(S)
).
• Each press of SOUND SELECT button or
FF
/
GG
button
changes the screen display as shown below.
Sound(M) Sound(S)
Using Sub picture Still Function
1. Press the PIP STILL button in the PIP mode.
• In PIP or TWIN PICTURE modes, the sub (inset) pic-
ture is frozen.
• Frozen picture is released automatically after about 10
minutes.
• If still picture is on the screen for more than 5 minutes,
the image becomes dark. If another function is activat-
ed, normal screen brightness is restored.
2. To return to normal viewing, press the PIP STILL but-
ton again.
DW
FF
DW1
GG
DW1
DW
FF
DW1
GG
DW2
DW
FF
DW1
GG
Off
Video
or
(AV1) S-Video
Component
or
(AV2)