Filter
Top Products
19
Screen Menu Options
- If the picture isn’t clear after auto adjustment and especially if characters are still jittery, adjust the picture phase
manually.
- You can only adjust
V-Position/H-Position
in COMPONENT (480p) or RGB1(PC).
Auto Adjustment (RGB1 (PC) mode only)
- Automatically adjusts picture position and minimizes image shaking.
- Although the image is still not correct, your Monitor is functioning properly but needs further adjustment.
1. Press the AUTO CONFIG. button to run Auto configure.
• If the position of the image is still not correct, try Auto adjustment again.
2. If picture needs to be adjusted more after Auto adjustment in RGB1 mode, you can
manually adjust the image position and
Phase
.
Adjusting Horizontal/ Vertical Position
1. Press the MENU button and then use
DD
/
EE
button to select the SCREEN menu.
2. Press the
GG
button and then use
DD
/
EE
button to select
Screen adj.
.
3. Press the
GG
button and then use
DD
/
EE
button to select
V-Position
or
H-Position
.
4. Press the
GG
button and then use the
FF
/
GG
button to adjust until you get desired hori-
zontal or vertical position.
• The adjustment range of
V-Position
is -50~+50.
• The adjustment range of
H-Position
is -100~+100.
• If you install the monitor vertically on the wall, the adjustment range of
V-Position
/
H-
Position
may change.
• Based on the PC resolution, the adjustment range of
V-Position/H-Position
may
change.
• Based on input signal, the position of the picture may not change even though you
have adjusted the horizontal or vertical position with this function.
5. Press the MENU button.
Picture Phase Adjustments (RGB1 (PC) mode only)
1. Press the MENU button and then use
DD
/
EE
button to select the SCREEN menu.
2. Press the
GG
button and then use
DD
/
EE
button to select
Screen adj.
.
3. Press the
GG
button and then use
DD
/
EE
button to select
Phase
.
4. Press the
GG
button and then use the
FF
/
GG
button to adjust phase.
• The adjustment range of
Phase
is 0 ~ 63.
5. Press the MENU button.
Auto configure
[V-Position]
GG
[H-Position]
Phase
Reset
Screen adj.
0
Screen adj.
GG
VGA Mode
ARC
PIP/DW
Zoom
Screen
To Set
Auto configure
[V-Position]
[H-Position]
Phase
GG
Reset
Screen adj.
30