Filter
Top Products
8
Watching VCR (When the Interface board is installed.)
The interface board(AP-42EA40/41) is not equipped on MT/MZ-42PZ42/43 series models.
- When connecting the Monitor to external equipment, match the colours of connecting ports (Video - yellow, Audio (L) - white,
Audio (R) -red).
- Connect the VIDEO INPUT socket (yellow) with the BNC-RCA adaptor to the VIDEO INPUT on the Monitor.
- If you have a mono VCR, connect the audio cable from the VCR to the AUDIO (L/MONO) input on the Monitor.
- If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular
VCR to the Video input.
Or, connect the Euro scart socket of the VCR to the Euro scart socket of the set.
- Use the orbiter function to Avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still
picture from a VCR.
If a 4:3 picture format is used; the fixed image may remain visible on the screen.
- To avoid picture noise (interference), leave an adequate distance between the VCR and Monitor
1. Use the INPUT SELECT button on the remote control to select
Video
or (
AV1
or
AV2
).
(If connected to S-VIDEO, select the
S-Video
external input source.)
2. Insert a video tape into the VCR and press the PLAY button on the VCR. (See VCR owner’s manual)
Watching external AV source (When the Interface board is installed.)
The interface board(AP-42EA40/41) is not equipped on MT/MZ-42PZ42/43 series models.
- When connecting the monitor to an external source, match the colours of AUDIO/VIDEO input jacks on the monitor with
the output jacks on the audio/video equipment: Video = yellow, Audio (Left) = white, Audio (Right) = red.
Or, connect the Euro scart socket of the VCR to the Euro scart socket of the set.
1. Use the INPUT SELECT button on the remote control to select
Video
or (
AV1
or
AV2
).
2. Operate the corresponding external equipment. See external equipment operating guide.
Watching Cable TV (When the Interface board is installed.)
The interface board(AP-42EA40/41) is not equipped on MT/MZ-42PZ42/43 series models.
- After subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV programming.
This monitor cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the Monitor.
- For further information regarding cable TV service, contact your local cable TV service provider(s).
1. Use the INPUT SELECT button on the remote control and select
Video
or (
AV1
or
AV2
).
2. Tune to cable service provided channels using the cable box.
• Component Input ports
You can get better picture quality if you con-
nect DVD player with component input ports
as below.
Component ports of the
Monitor
Y
PB
PR
Video output ports
of DVD player
Y
Y
Y
Y
Pb
B-Y
Cb
PB
Pr
R-Y
Cr
P
R
Watching DVD (When the Interface board is installed.)
The interface board(AP-42EA40/41) is not equipped on MT/MZ-
42PZ42/43 series models.
How to connect
Connect DVD video inputs to Y, P
B, PR of COMPONENT (DVD
INPUT) and audio inputs to Audio sockets of AUDIO INPUT.
Or, connect the Euro scart socket of the VCR to the Euro scart socket
of the set.
How to use
1. Turn on the DVD player, and insert a DVD.
2. Use INPUT SELECT button on the remote control to select
Component
or (
AV1
or
AV2
). Refer to the DVD player's manual for
operating instructions.
External Equipment Viewing Setups