Filter
Top Products
21
ENGENGLISH
WATCHING TV
WATCHING TV
Connecting an antenna
Connect an antenna to watch TV while referring to
the following.
To prevent damage do not connect to the mains
outlet until all connections are made between the
devices.
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
y
Use a signal splitter to use more than 2
TVs.
y
If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
y
If the image quality is poor with an
antenna connected, aim the antenna to
the correct direction.
y
An antenna cable and converter are not
supplied.
NOTE
Turning the TV on for the first
time
When you turn the TV on for the first time, the
Initial setting screen appears. Select a language
and customize the basic settings.
1
Connect the power cord to a power outlet.
2
In Standby mode, press
(POWER) to turn
the TV on.
The Initial setting screen appears if you turn
the TV on for the first time.
y
You can also access Factory Reset by
accessing OPTION in the main menus.
NOTE
3
Follow the on-screen instructions to customize
your TV settings according to your preferences.
Language
Selects a language to display.
Mode Setting
Selects Home Use for the
Home environment.
Country
Selects a country to display.
(Except for Israel)
Time Zone
Selects the time zone and day-
light saving.(Only Australia)
Auto Tuning
Scans and saves available
channels automatically.
y
DTV mode control buttons may not
function based on country broadcasting
circumstances. (Only DTV)
y
In country that Digital broadcasting
regulation isn’t fixed, some DTV function
may not work depending on digital
broadcasting circumstances. (Only DTV)
y
To display images in the best quality for
your home environment, select Home
Use.
y
Store Demo is suitable for the retail
environment.
y
If you select Store Demo, the any
customized settings will switch back to
the default settings of Store Demo in 5
minutes.
NOTE
ANTENNA/
CABLE IN
Wall Antenna
Socket