Filter
Top Products
PAGE 33
Aspect Ratio
Press the MENU button on the remote control,
then use the UP/DOWN arrow button to select
the Special menu. Or press RATIO button to
instantly access the Aspect Ratio menu.
Press ENTER or the RIGHT arrow button to acti-
vate the Special menu.
Use the UP/DOWN arrows to choose Aspect
Ratio.
Press ENTER or the RIGHT arrow button to move
into the Aspect Ratio selection menu. Use the
UP/DOWN arrow buttons to select the right ratio
for your viewing environment:
• 4:3 - Choose when you want to view a pic-
ture with an original 4:3 aspect ratio, with
black bars appearing at both the left and
right sides.
• 16:9 - Choose when you want to adjust the
picture horizontally, in a linear proportion to
fill the entire screen. (Useful for viewing 4:3
formatted DVDs.)
• Horizon - Choose when you want to adjust
the picture in a non-linear proportion, that
is, more enlarged at both sides, to create a
spectacular view.
• Zoom1 - Choose when you want to view the
picture without any alteration. However, the
top and bottom portions of the picture will
be cropped.
• Zoom2 - Choose when you want the picture
to be altered, both horizontally extended and
vertically cropped. The picture taking a
halfway trade off between alteration and
screen coverage.
Press EXIT to save and return to TV viewing or
press the ENTER button to save and return to
the previous menu.
1
2
3
4
5
Lets you choose the way that an analog picture with a 4:3 aspect
ratio is displayed on your TV with a 16:9 ratio. When you receive
an analog picture with a 4:3 aspect ratio on your 16:9 TV, you
need to specify how the picture is to be displayed according to
your preference.
Aspect Ratio G
Trilingual Menus
Captions
EZ Demo
F Prev.
4:3
16:9
Horizon
Zoom1
Zoom2
SETUP
SETUP
VIDEO
VIDEO
AUDIO
AUDIO
TIME
TIME
LOCK
LOCK
SPECIAL
SPECIAL
1 2 3
4 5 6
7 8 9
0
tv
mode
light
power
tv/video
dvi
rgb
vcr
cable
dvd
sat
mute
swappipch- pipch+
pip
ratio
recordstop
pause
rew
play
ff
menu exit
cc freeze
pip input
vol
ch
surf
sap
video
comp2comp1
front
skip
enter flashbk
2/4
5
1
1
1/3/4
2/4/5
1/3/4
With RGB-PC, you can select either 4:3 or 16:9
aspect ratios.
With RGB-DTV (720p, 1080i) and Component 1-2
(720p, 1080i), you can select either 4:3, 16:9
and Zoom1-2 aspect ratios.
Aspect ratio is changed to 16:9 automatically
when receiving 720p and 1080i to component
input1/2, RGB, and DVI jack.
After connecting external equipment to the TV,
don’t display a still picture for a long time on
the screen. Doing so may damage the TV screen.