Filter
Top Products
8
Connecting the Display
A
B
Connect DVI-D (Digital signal) Cable
Connect D-sub (Analog signal) Cable
Connect VIDEO and AUDIO Cable
Connect HDMI Cable (HDMI1, HDMI2)
1. Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
2. Connect signal input cable and power cord in order, then tighten the screw of
the signal cable.
Connecting with the PC/
AV equipment
1 2
Mac adapter: For Apple Macintosh use, a separate plug adapter
is needed to change the 15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2 row connector.
When using a D-Sub signal input cable connector for Macintosh
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
C
D
Wall-outlet type
Varies according to model
DVI-D (This feature is not available in all countries.)
DVD player or others which have component port
Headphone/Earphone output
PC input
AV equipment
(Set-Top Box, DVD,
Video,Video Game Console)
* HDMI is optimized on the AV equipment.
* Not supported PC.