Filter
Top Products
User Manual
English
- 3 -
Notes on using DVI equipped devices: To connect devices equipped with DVI
connections, you can use either modular DVI/HDMI adapters or DVI/HDMI adapter
cables. Be aware that DVI is a ‘video only’ interface – no audio signals will be switched by
the HDMI Switch Remote when using DVI devices!
Connection & Operation
Rear Panel Connections:
1. HDMI output: Using an HDMI cable, connect the HDMI OUT to the HDMI input on your
display
2. HDMI inputs: Use HDMI cables to connect the HDMI outputs of your source devices to the
four HDMI IN inputs.
3. Power input: Connect the supplied 5V DC power supply
Front Panel Operation and Indicators:
4. Remote control sensor
5. Input select: Press the INPUT button to cycle through the different input channels. The
appropriate LED will illuminate to indicate the selected channel
6. Power LED: Illuminates when the power is connected
7. Power button: Switches power on/off to the unit
Remote Control Operation:
8. Power button: Press to turn the unit on/off
9. Input select: Press 1,2, 3 or 4 to select the source
10. Void buttons: Buttons 5 to 0 are not used
8
9
10
5
6
4
7
2
1
3