Filter
Top Products
SPECIFICATION
Standards
Protocol
Forwarding Rate
Connector
Network cable
Wavelength
DIP Switch
MAC address
Buffer
Packet Size
LED
Dimension
Operating Temp.
Operating Humidity
External Power
Power consumption
Weight
EMI
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-Tx Fast Ethernet
ANSI/IEEE 802.3 Auto-Negotiation
IEEE 8023.x Flow control on Half/Full Duplex
CSMA/CD
14880 PPS for 10Mbps
148800 PPS for 100Mbps
One STP RJ-45 connector
One fiber connector: SC/ST/MT-RJ/VF-45
10BASE-T: 2-pairs UTP/STP Cat.3,4,5 cable
100BASE-TX: 2-pairs UTP/STP Cat.5 cable
100BASE-FX:Single mode fiber (8/125um, 9/125um)
multi-mode fiber (50/125um, 62.5/125um)
Fiber Distance: Multi-mode fiber(2KM)
Single-Mode fiber (15/30/60 KM)
Multi-mode: 850nm
Single-Mode: 1310nm
DIP Switch 1: UTP Auto-Nego/10Mbps Full Duplex mode
DIP Switch 2: Fiber Full/Half Duplex
DIP Switch 3: LLF(Link Lose Forwarding) Enable/Disable
DIP Switch 4: UTP LLF (for User Site)
Fiber LLF (for Central Site)
1K Mac address table with auto learning
1MB
64 to 1518 Bytes (No VLAN tag)
68 to 1522 Bytes (with VLAN tag)
Per port: Speed, Link/Activity, Full/Collision
Per Unit: Power
155mm x 72mm x 19mm( L x W x H)
0 to 45 (
10% to 90% ( Non-condensing)
Input: 100~240 VAC,50~60HZ; DC 5V @ 2.5A
4.2 Watts
307g
FCC A, CE