Loewe 9272 Flat Panel Television User Manual


 
17
Modes of operation
Pause (PAUSE)
Next chapter (only for DVD)
Previous chapter (only for DVD)
Record
Perform selected function.
When you start a recording, the program you
have just selected is recorded. You cannot switch
over to another channel, it is locked. You can
only switch over when the recording has
finished.
Exceptions:
1. You have installed several tuners (not PIP
tuners) in the TV set, then you can watch
another channel with the second tuner.
2. You can also watch the signal via an AV
connection (e.g. DVD player or a second
VCR).
3. In a VCR with Digital Link Plus the VCR tuner
is used for the recording (not for satellite
programs).
Video menu
Show the Video menu
OK
❚❚
You can change and delete timer data or program
new recordings in the ”Timer” menu.
The ”Record” menu gives you the option for
timer programming by EPG, teletext or manually.
You can call the archive list with ”DR Archive” if
a Digital Recorder is built in.
In the ”Connections” menu you can log other AV
equipment on or off. In the ”Digital Link Plus
transfer” menu the station data of the TV set (not
satellite stations) are transmitted to the Digital
Link Plus VCR.
In the Settings menu you can enter the record
lead and follow on time and serial recording
tolerance.
Digital Link Plus VCRs have the possibility for
transferring the station data from the TV set to
the VCR via the Euro-AV cable (not for satellite
stations). Every time you change the station
memory of the TV, you are asked whether you
want to make a data transfer.
The receiver unit of the VCR is always used for
recording with a Digital Link Plus video recorder
(not satellite stations) and the tuner of the TV set
is available for watching TV.
Loewe VCRs also have Digital Link, a system for
controlling Loewe VCRs via the Euro-AV cable. If
the Loewe VCR only has Digital Link, the TV tuner
is used for recording. If you have installed your
Loewe VCR in a concealed place, you can operate
the Loewe VCR with the remote control. Operati-
on with the control bar also works with Digital
Link.
Digital Link must be switched on on the
video recorder.
Only use fully wired Euro-AV cables, otherwise
Digital Link or Digital Link Plus will not work.
M
Video mode
You can operate Loewe video recorders and DVD
players with the video control bars even if they
are hidden. The VCR’s must be connected to the
Euro AV sockets (Scart) and logged in under the
”Connections” menu.
Digital Link must be switched on on the Loewe
video recorder. Only then can you use the
control bar. You also need Digital Link or Digital
Link Plus for timer recordings of satellite
programs controlled by the TV set.
You can display up to three control bars but they
are only displayed by logged in VCR’s and DVD
players.
Show/hide video
control bar
Select the video control bar if
several VCR’s or a DVD player
and a VCR are connected.
Select function
Switch VCR/DVD on/off
Select video input (Euro-AV
socket) for the VCR
Rewind (only for VCR) or Scan in
rewind
Stop (STOP)
Playback (PLAY)
Fast forward (only for VCR) or
Scan in fast forward
AUX
Video menu
DR archive
Connections
Settings
OK
M
i
E
Back
Info
End
Recording
Timer
STOP
❚❚
AUX
VCR STOP
❚❚
OK
M
i
E
Menu
Info
End
DVD
V
=
The Video menu provides you with the follow-
ing options:
BAQ2550H_31308_020_3_GB2 07.05.2004, 10:58 Uhr17