Loewe 32 HD/DR+ Flat Panel Television User Manual


 
15
If, for example, you do not receive any EPG
providers (analog TV) and no DVB is installed in
the TV set, you should switch off the data acqui-
sition.
Performing data acquisition
The data must be collected first after these
settings or every time the TV is switched off. To
do this, select the program which you have
defined as a provider and leave it switched on
for about one hour or switch the TV set to
standby mode. The green LED lights up in addi-
tion to the red LED after about two minutes.
Data acquisition takes about one hour, in sets
with a DVB module a little longer. The data are
automatically collected between 2 and 5 in the
morning when the TV is switched off to standby.
Defining personal topics
You will find the programs that interest you
faster when you define your personal topics.
Mark ”Select personal topics” in the EPG menu
and put together your list of personal topics.
TV radio mode
Switch the TV radio mode on and off by pressing
the RADIO button. If at least one satellite tuner
and possibly a DVB module are installed in your
TV set, you will be able to receive radio stations.
If none of these additional modules is installed,
you can only select the audio inputs and play
back through these with the station table or the
 buttons.
Modes of operation
Performing station selection for EPG
Select the stations here for which information is
to be collected.
Stations marked by + are favorite stations. The
provider supplies information for stations marked
by E (terrestrial, cable and analog satellites) and
D (digital), these are already marked (blue let-
ters).
Mark the station/Remove the
marking
red: Only mark favorite
stations
green: Mark all stations
yellow: Only mark this station
Back to the EPG menu
Switching data acquisition on/off
Mark ”Data acquisition” in the
EPG menu under ”other”
Select data acquisition off/on
EPG settings
If you want to change the provider or want to
have other programs evaluated, you can do this
in the EPG menu.
Provider search
EPG on/off
Call EPG menu
Mark ”Provider/Select
station”
Call
Start provider search (green
button). This may take some
time.
Mark the provider
Save the provider
This is followed by a station search and a list of
TV stations is displayed which transmit data.
Move on to the provider selection with the OK-
button.
If the stations offered are what you want, move
on to the station selection with the blue but-
ton.
EPG
OK
OK
OK
OK
OK
OK
OK
EPG menu
List of memorized stations
Select provider/program
Favorite programs
Select personal topics
Timer
Switch on TV when marked yes
other ...
Info
Back
End
OK
INFO
MENU
END
Select provider
Info
3SAT
PRO7
RTL2
TV 5
TRT 1
Select provider
and confirm
with OK
Back
End
Provider search
Change provider list
Program selection
OK
INFO
MENU
END
Program selection: 3SAT
0 VIDEO
1+ARD E
2+ZDF E
3+SAT.1 E
4+RTL E
5 VOX
6+S–RTL E
7+N–TV
8 DSF
9+S–RTL E
10+MDR 3
11 DSF
12 TM3
13+PRO7 E
14+RTL 2 E
15+WDR 3 E
16+BR 3 E
17+HR 3 E
18 KIKA
19 PHOENIX E
20 EUROSPRT
21 KABEL 1
22 MTV
23 CNN INT.
24 HOT
25 TV 5
26 VIVA
Back
Info
End
Select programs
and mark
with OK
+ Mark
Mark all
Mark only
INFO
MENU
END
OK
EPG menu
other ...
Memorized stations first report
Data acquisition off on
Short info lines none
EPG entry last setting
Info
Back
End
INFO
MENU
END
Select personal topics
Info
Select topics
and mark with OK
Back
End
Film
News
Show
Hobby
Sport
Child
Knowledge
Music
Culture
General music
Jazz
Rock/Pop
Classical
Folk/Easy listening
Musicals/Opera
Other
mark all
Mark only
OK
INFO
MENU
END
BAQ2550H_31310_021_4_GB 22.07.2004, 10:15 Uhr15