Loewe Digital Recorder + Flat Panel Television User Manual

Open as PDF

of 22

17 -

english

Archive playback

If you have jumped past the desired part of the recording, jump in the

opposite direction. Brieﬂ y press the button . This jump in the opposite

direction is only carried out for half the jump distance. Now press  to

jump back out of the area that is to be hidden.

If in the process you jump past the place where you want to start the hide

process, then jump forward using . In the process, the jump distance is

cut in half again.

By cutting the jump distance in half when changing the jump direction, you

can feel your way up close to a particular section.

The pre-set jump distance is reinstated if you jump more than three times in

the same direction or if the Digital Recorder display disappears.

Fast forward and rewind

You can fast forward and rewind at three different speeds during archive

playback. No sound is audible during winding.

Press the Fast Forward  or Rewind  button a little

longer.

Increase speed: press again brieﬂ y.

The speed increases every time you press the button until

eventually switching back to the initial speed.

Press the Play button  when you reach the point from

which you want to continue watching.

You will see a freeze picture when you reach the end of the recording.

When rewinding reaches the beginning, the Digital Recorder switches to

playback mode.

Playing highlights

If there are manually set bookmarks in the current playback, they can be

played as highlights one after the other automatically. 30 seconds before and

after the set bookmark are played.

The highlights are numbered chronologically and displayed consecutively, i.e.

the playback always starts with highlight 1 again. The playing of highlights

can be terminated by pressing the Stop button.

Show the drive display.

Press the Play button for “Highlights”.

Start playing highlights. As long as this drive display is shown, you jump to

the next highlight with the blue coloured key and to the previous highlight

with the red coloured key. You can also jump to the next highlight by press-

ing the Play buttonagain. This function is also available if no drive display is

shown. Pressing the Stop buttonends playing the highlights.

Jumping

If a jump distance has been set, you can jump by brieﬂ y pressing the drive

buttons .

jump forwards ...

... or backwards

Smart jump

The Smart jump function is included to enable fast and easy access to a

certain place within the recording which is currently being played. The factory

default setting has Smart jump switched on.

When Smart jump is switched on, the jump distance is cut in half after each

change in the jump direction while jumping.

The playback symbol  is yellow when the Smart jump function is active.

For instance, you are searching for the beginning of the section where a por-

tion of the recording is to be hidden.

In this case, for example, press the button  several times to jump forward

(pre-set jump distance).

00:00

00:25

00:59

Bookmark Highlights Bookmark ➝

➝