Loewe A 42 HD+ 100, A 37 Full-HD+ 100, A 37 HD+ 100, A 32 HD+ 100 Flat Panel Television User Manual


 
- 14
Positioning/aligning the DVB-T antenna
If you receive one or more DVB-T stations with picture or sound interfer-
ence, you should change the position and alignment of the antenna. Ask
your dealer to tell you which channels are used to broadcast the DVB-T
stations in your region.
In normal TV mode, without other displays.
A DVB-T station is received and selected.
Call TV menu.
 Select Settings,
go to the menu line below.
 Select Stations,
go to the menu line below.
 Select Manual adjustment,
OK call manual adjustment.
The signal source is already on DVB-T due to the station
preselection.
Position and align the antenna in such a manner that
maximum values for C/N and Level are obtained.
Blue button: Start search.
Search for DVB-T stations one after another and compare
values for C/N and Level.
Then position/align the antenna to the weakest station
so that maximum values for C/N and Level are obtained.
Thereafter perform an automatic search for all DVB-T
stations, see page 24.
Explanation of the setting possibilities:
Depending on the selected channel and country the
associated bandwidth of 7 or 8 MHz will be set auto-
matically.
If you have logged in and connected a recorder in the
connection wizard, the Digital Link Plus transmission
starts when the sound component wizard closes. If a
Digital Link Plus compatible recorder is connected, the
station list of the analogue stations is transmitted to the
external recorder.
You can also call Digital Link Plus manually under TV menu
Connections Digital Link Plus.
Explanations of the DVB-T antenna:
With good reception conditions a room antenna can be
used for DVB-T (socket ANT2).
Under less favourable reception conditions, an active
antenna is recommended which must be set accordingly
in the first time commissioning or in the TV menu Con-
nections Antenna DVB Antenna DVB-T (see DVB-T
antenna on page 13).
If the location is outside of the normal transmission range
then a directional antenna can be used to improve recep-
tion quality.
Initial installation
END
INFO
Manual adjustment
SIgnal source DVB-T DVB-C DVB-S A
Channel E05
Frequency 177.50 MHz
Bandwidth 7 MHz
Name 12 Test
C/N 81
Level 80
BER 0 E-7
Overwrite station
Search
Signal source
Select the area in which you want the broadcaster to search here. You can
use the button to automatically select station by station.
Bandwidth
Digital Link
Plus
Room
antenna
Active
antenna
Unidirectional
antenna
33156_024_Xelos_A32_42_GB_9_00_B14 1433156_024_Xelos_A32_42_GB_9_00_B14 14 03.07.2008 15:36:5003.07.2008 15:36:50