Mace DVR56MR DVR User Manual


 


  
35
Menu of Admin setting is pictured at Right:
Select GUEST and MANAGE. Press  or the number
key to change the password, and then confirm the change by
inputting the password again. Press ESC to go back to the sub
menu. Only MANAGE level user can change the password.
PLAYMODE has two modes, VIDEO BEST the best flow
and AUDIO SYNC the best synchronization When Alarm indicator
light is on, if there is external alarm input, then alarm information comes
out When Alarm indicator light is off, alarm information won’t come
out. If SHUT PASSWORD is ON, correct manage level password is
needed to be input before turning off the power of DVR. .If SHUT
PASSWORD is off, the DVR will be closed 4 minutes after pressing
the power button. MONITOR OSD , when it is on, real time
monitoring channel characters are displayed while it is off, no
display.
Press  to get the setting and press ENTER to confirm. Press
to confirm YES or NO.
After the default setting is selected,
system will restore the original Factory Default settings. Or
restore to the original net user name and password.
File delete
Used to clear the data in the HDD. Be careful with this item.
Before you delete the data, you have to input the manage password.
LOAD DEFAULT CONFIGURES?
YES NO
RESET NETWORK USER TO
DEFAULT?
YES NO
Default
Password
Others
SAVE CANCEL
6.4.4 Admin setting
DATA DELETE
PASSWORD: _______
PLAYMODE AUDIO SYNC
ALARM TIP OFF
SHUT PASSWORD OFF
MONITOR OSD ON