Magnadyne MV1020 DVD Player User Manual


 
18
Only qualified service personnel can remove
the cover or service this player. Otherwise the
warranty will become invalid.
No Power:
Check to see if the player is set to “On”.
Check to see that the power plug of the main
unit is properly connected.
• Check to see if that power to the outlet is
properly working.
No Picture:
• Check to see that the monitor is switched to
“On”.
• Check that the correct SOURCE is selected
(DVD or AV) by pushing the SOURCE button.
Check the video connection.
Distorted Picture:
• Check the disc for fingerprints and clean with
soft dry cloth, wiping from center to edge.
• A small amount of picture distortion may
appear. This may not be a malfunction.
Completely Distorted Picture:
The disc format is not according to the monitor
used (PAL/NTSC).
No Color in Picture:
The disc format is not according to the monitor
used (PAL/NTSC).
No Sound:
Check audio connections.
• If using a Hi-Fi amplifier, try another sound
source.
Disc Does Not Play:
Ensure the disc label is facing forward.
Clean the disc.
Check to see if the disc is defective by trying
another disc.
The Player Does Not Respond to the Remote
Control:
Aim the remote control directly at the sensor
on the front of the housing.
• Avoid all obstacles which may interfere with
the signal path.
Inspect or replace the remote control batter-
ies.
Buttons Do Not Work:
Press POWER to turn “Off” the unit, then
press it again to turn “On” the unit.
Volume different for DVD and CD:
This is due to different recording methods
Troubleshooting