Filter
Top Products
EN-9
ENGLISHFRANÇAISEESPAÑOL
Connect to a cable
When your TV is connected to the cable socket,
you may receive free digital and high definition
programming (depending on your cable provider).
Digital and high definition cable channels can be
recognized by the format of the channel number. The
channel number includes a dot “.” For example, 11.1,
46.30, 108.201. Contact your cable provider for more
information.
Connect to a Direct Broadcast Satellite (DBS)
CABLE
SATELLITE
Cable Receiver Box
OR
OR
ANTENNA SATELLITE CABLE
OR
Cable
Receiver Box
OR
CABLE
There are two main DBS systems: DirecTV and
DishNetwork. These systems require a separate,
proprietary set-top box to decode signals and send
them to the TV. The set-top box contains a digital TV
tuner for receiving off-air digital television broadcasts.
Contact your local DBS provider for more
information about the connections and the TV
channels.
Connect to a cable receiver box/satellite set-
top box
CABLE
SATELLITE
Cable Receiver Box
OR
OR
ANTENNA SATELLITE CABLE
OR
Cable
Receiver Box
OR
CABLE
A cable receiver box or satellite set-top box can
be connected to the TV through the following
connections:
ANTENNA (75ohm)•
A/V (Composite Video and Audio)•
S-Video and Audio•
YPbPr (Component Video Input)•
HDMI•
Connect a cable receiver box/satellite set-top
box through RF IN/OUT
If the TV is connected to a cable box or satellite
set-top box via a coaxial connection, set the TV to
channel 3 and 4, or the channel specified by the
service provider.
Connect a cable receiver box/satellite set-top
box through component video input or HDMI
CABLE
SATELLITE
Cable Receiver Box
OR
OR
ANTENNA SATELLITE CABLE
OR
Cable
Receiver Box
OR
CABLE