Filter
Top Products
Brightness
Contrast
Tint
Blue Back
C. Temp
50
50
00
On
Normal
Sharpness 50
Color
50
Noise Red.
Off
You can set your TV to receive local TV chan-
nels (From an antenna) or Cable TV channels
(when you have Cable TV service). Use Auto
search to set up channels that are available for
you. This makes it easy for you to select only
the available TV stations when you press CH+
or CH-. Before you start auto search, connect
the Antenna or Cable TV signal as detailed on
pages 5 and 6; set TV/CATV as described on
page 11.
Press MENU to see the menu.
Press CH+ or CH- repeatedly to
highlight Auto search.
Press VOL+ or VOL- to highlight
(Preset).
Press CH- to enter Preset submenu.
Press VOL+ to start programming TV
channels. Press the VOL- if you need
to stop channel programming during
the process.
When channel setup is completed, the
TV will go to its lowest channel.
Programming
Please Wait
TV 2
Helpful Hints
Stop
Auto Search (Setting TV Channels)
12
Press CH+ or CH- to see
which channels are in the
TV s memory. You can still
select non-memorized
channels using the Number
buttons on the remote
control.
To delete unwanted chan-
nels from the TV s memory
or to add more channels, see
ADD/ERASE on page 15.
You cannot select Preset
menu if the TV is set to
AV1, AV2, or CVI.
Press TV/AV repeatedly to
get to the TV channels.
Favorite list
Manual Up
Auto search
Fine Tune
0
Add/Erase Add
2Channel
TVTV/CATV
Manual Up
Fine Tune
0
Add/Erase Add
2Channel
TVTV/CATV
Favorite list
Auto search