PIC.
T
o turn on the TV to a specific channel at a specific time, use the
On-Timer. Before you begin, set the clock correctly. Details are
on page 17.
1
Press MENU to show the on-screen menu.
2
Press VOL+ or VOL- to highlight SET.
3
Press CH+ or CH- to highlight TIMER, then press
VOL+ or VOL-.
4
Press CH+ or CH- to highlight ON TIMER, then
press VOL+ or VOL-.
5
While the time is highlighted (top line with AM or
PM), press VOL+ or VOL- to enter the ON time.
Hold down VOL+ or VOL- to change the time quickly in
10-minute increments.This will be the time at which the
TV will turn itself on.
6
Press CH+ or CH- to highlight CHANNEL.
7
Press VOL+ or VOL- to enter the channel number.This
will be the channel to which the TV turns on at the speci-
fied time.
8
Press CH+ or CH- to highlight TV/CABLE.
9
Press VOL+ or VOL- to select TV or CABLE, depend-
ing on whether you have Cable TV service or not. Details
are on page 11.
10
Press CH+ or CH- to highlight OFF, ONCE, or
DAILY. If you select ONCE, the timer will turn on the
TV one time within the next 24 hours only.
If you select DAILY, the timer will turn on the TV at the
same time and to the same channel every day.
Choose OFF to cancel the On-Timer.
11
Press VOL+ or VOL- to confirm your choice.
12
Press TV/AV/EXIT to remove the menu.
On-Timer
