Filter
Top Products
USING THE CVI (COMPONENT VIDEO INPUT) JACKS
C
omponent Video inputs provide for
the highest possible color and picture
resolution in the playback of digital signal
source material, such as with DVD play-
ers. The color difference signals (Pb, Pr)
and the luminance signal (Y) connected
and received separately, which allows for
improved color bandwidth information
(not possible when using composite video
or S-Video connections).
1
Connect the Component (Y,
Pb, Pr) Video OUT jacks from
the DVD player (or similar
device) to the (Y, Pb, Pr) in(put)
jacks on the TV. When using the
Component Video Inputs, it is
best not to connect a signal to
the AV1 IN Video Jack.
2
Connect the red and white
AUDIO CABLES to the Audio
(left and right) output jacks on
the rear of the accessory device
to the Audio (L and R) AV1 IN
Input Jacks on the TV.
3
Turn the TV and the DVD
(or digital accessory device)
ON.
4
Press the CH + or CH- but-
tons to set the TV to its CVI
channel. (Go to your lowest
channel, for example channel 1,
then change channels down to find
the correct source channel.)
5
Insert a DVD disc into the DVD
player and press the PLAY ᮣ
button on the DVD Player.
The description for the component video connec-
tors may differ depending on the DVD player or
accessory digital source equipment used (for exam-
ple, Y, Pb, Pr; Y, B-Y, R-Y; Y, Cr, Cb). Although
abbreviations and terms may vary, the letters b and
r stand for the blue and red color component sig-
nal connectors, and Y indicates the luminance sig-
nal. Refer to your DVD or digital accessory
owner’s manual for definitions and connection
details.
Note: Cables are not supplied with the TV,but are
available from Magnavox or electronics retailers.
HELPFUL HINT
L/Mono
Monitor out
VIDEO
S-VIDEO
AV1 in
Y
Pb
Pr
AV2 in
AUDIO
R
COMPONENT VIDEO INPUT
S-VIDEO
OUT
OUT
OUT
L
R
AUDIO
VIDEO
COMP VIDEO
Y
Pb
Pr
2
1
3
5
Audio
Cables
(Red and
White)
Component
Video
Cables
(Green, Blue,
Red)
Back of TV
Accessory Device
Equipped with
Component Video
Outputs.
The CVI connection will be dominate over the AV1 in Video
Input. When a Component Video Device is connected as
described, it is best not to have a video signal connected to
the AV1 in Video Input jack.
6