Filter
Top Products
HOW TO USE THE SOUND ADJUSTMENT CONTROLS
16
Main
Picture
Sound
Features
Install
Treble
Bass
Balance
AVL
Incr. Surround
More...
Treble
50
Balance
Bass
R
L
AVL
On
or Off
Incr. Surround
Spatial
or Mono
Incr. Surround
Dolby Virtual
or Stereo
Sound
Mono
or Stereo
50
SAP
On
or Off
T
o adjust your TV sound,select and use the
Sound Menu Controls listed below:
1
Treble Boost:Press the ᮣ or ᮤ
buttons to turn the control On or
Off.When On, the control will
enhance the high frequency sounds.
2
Bass Boost:Press the ᮣ or ᮤ
buttons to turn the control On or
Off.When On, the control will
enhance the low frequency sounds.
3
Balance:Press the ᮣ or ᮤ but-
tons to adjust the level of sound com-
ing from the left and right speakers.
4
AVL: (Auto Volume Leveler) Press
the ᮣ or ᮤ buttons to turn the
control On or Off.When On,AVL
will level out the sound being heard
when sudden changes in volume
occur during commercial breaks or
channel changes.
5
Incr.
Surround: Press the ᮣ or ᮤ
buttons to select between Dolby
Virtual or Stereo settings (If Stereo),
or select Spatial or Mono (If Mono).
6
SAP: Press the ᮣ or ᮤ buttons
to toggle this control to On or Off.
SAP is short for Secondary Audio
Programming and is sent as a third
audio channel, a SAP signal can be
heard apart from the current TV
program sound.
Note: If SAP is not present on a
selected show No SAP will appear on
the screen.
7
Sound:Press the ᮣ or ᮤ buttons
to select between Stereo or Mono
settings. Note:If Stereo is not pres-
ent on a selected show and the TV is
placed in the Stereo mode, the sound
coming from the TV will remain in
the Mono mode.