Filter
Top Products
30 One-Touch Recording
The One-Touch Recording (OTR) function allows you to program
an immediate timed recording from 30 minutes to eight hours
long without setting the timer.
Before you begin, make sure:
● Channels are set up.
● There is a tape in the TV/VCR. The record tab must be intact.
1
Use the CHANNEL o/p buttons or the Number buttons
to select the channel you want to record.
4
2
Press the SPEED button until the desired recording speed
(SP, LP, or SLP) appears on-screen. Details are on page 29.
3
Press the REC(ord)/OTR button repeatedly until the
desired recording length appears in the upper right corner of the
screen. Recording will begin immediately. The RECORD light will
appear.
OTR LENGTH 0:30
CH12
LENGTH : PRESS OTR
CANCEL : PRESS CLEAR
4
To stop an OTR before recording is finished, press the
STOP/EJECT button on the TV/VCR.
Or, press the REC(ord)/OTR button, then press the
CLEAR button, then press the STOP/▼ button on the
remote control.
• To check the time remaining for an
OTR after the OTR has been set,
press the STATUS/EXIT button.
• To change the recording length
while an OTR is in progress, press
the REC(ord)/OTR button until the
desired recording length appears
on-screen.
• You can not pause an OTR.
• To cancel an OTR but continue
recording, press the REC(ord)/OTR
button, then press the CLEAR but-
ton.
• You cannot record if DEFEAT
RECORDING is set to ON. Details
are on page 36.
• You can change the tape speed
with the SPEED button while a
recording is in progress, but some
distortion may appear on the tape.
Helpful Hints
Press the STOP/EJECT but-
ton on the TV/VCR to stop
the OTR.
POWER CLEARSTATUS/EXIT
1 2 3
4 5 6
7 8 9
0
CHANNEL
SLEEP
MUTE
SPEED
VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL
STOP/
+100
ALT.CH
MENU
MEMORY
2
3
1
CCZ190comb.QX33 4/5/99 9:51 PM Page 30