Filter
Top Products
–
9
–
EN
DVD FUNCTIONS
STANDBY-ON
AUDIO
SUBTITLE
ANGLE
REPEAT
CLEAR
A
-
B
PAU S E
SLOW
SKIP
OPEN/CLOSE
DISPLAY
SEARCH
MODE
12
3
45
6
78
9
0
+10
PLAY
REV FWD
STOP
DVD FUNCTIONS
Please note : most instructions in this manual refer to remote control use.
Playback
Before:
Turn on the TV, amplifier and any other
device which are connected to this unit.
Make sure the TV and audio receiver (not
supplied) are set to the correct channel.
(
⇒
on page 10
)
Note:
• When you play back a CD-RW/-R with MP3 files,
details on page 10.
• A “ ” may appear at the top-right on the TV
screen when the operation is prohibited by the disc or this
unit.
• Some DVD may start playback from title 2 or 3 due to specific
programs.
• During the playback of a 2-layered disc, pictures may stop for
a moment. This happens while the 1st layer is being switched
to the 2nd layer. This is not a malfunction.
• You can change the on-screen language in “PLAYER MENU”
setting. (Refer to page 14.)
4
3
1
IR
P-SCAN
PLAY
STOP
OPEN/
CLOSE
1
Press [STANDBY-ON] to turn on this
unit.
2
Press [OPEN / CLOSE A] and insert a
disc with label facing up.
3
Press [PLAY B] to start playback.
4
Press [STOP C] to stop playback.
2
22 1
Lights up when power is on.
Resume Playback
Press [STOP C] during playback. Resume icon
will appear at the top-left on the TV screen. Press
[PLAY B], playback will resume from the point at
which playback was stopped.
Slow Forward Search
Press [FWD g] repeatedly in the pause mode
to select the required forward speed.
To continue playback, press [PLAY B].
Paused and Step-by-Step Playback
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
The disc goes forward by one frame each time [PAUSE F]
is pressed in the pause mode.
To continue playback, press [PLAY B].
Note:
• Slow forward speed is different depending on the disc.
Approximate speed is 1(1/32x), 2(1/16x), 3(1/8x), 4(1/4x) and
5(1/2x).
• Set “STILL MODE” to “FIELD” in “DISPLAY” menu if pictures in
the slow playback mode are blurred. (Refer to pages 14-15.)
• The reverse of slow playback is not available.
Fast Forward / Reverse Search
Use [FWD g] or [REV h] repeatedly during
playback to select the required forward or
reverse speed.
To continue playback, press [PLAY B].
1
E
1
Note:
• Set “STILL MODE” to “FIELD” in “DISPLAY” menu if pictures in
the pause mode are blurred. (Refer to pages 14-15.)
PAUSE
Note:
• Menu operations may vary depending on the disc. Refer to
the manual accompanying the disc for more details.
R.STOP
Note:
• To cancel resume, press [STOP C] one more time in the stop
mode.
• For MP3, playback will resume from where you stopped (if
the power has been turned off, the playback will start from
the beginning of the track).
• The resume playback information stays on even when the
power is turned off, as long as the disc stays in the unit.
Note:
• Fast forward or reverse search speed is different depending
on the disc. Approximate speed is 1(2x), 2(4x), 3(8x), 4(16x)
and 5(32x).
Note:
• Zooming function does not work while the disc menu is
displayed.
• Some part of the picture may not be zoomed depending on
the disc or playback status.
Zoom
1) Press [ZOOM] repeatedly during playback to select the
required zoom factor: 2x, 3x, 4x, 1/2x or off.
x2 x3 x4 x1/2
2) Use [K / L / s / B] to slide the zoomed picture across the
screen.
3) To exit zoom function, press [ZOOM] repeatedly to select off.
Disc Menu
Some discs contain menus which allow you to customize DVD
playback. Use [K / L / s / B] to select an item, then press
[ENTER] (or [PLAY B]).
Calling Up a Menu Screen during Playback
• Press [MENU] to call up the disc menu.
• Press [TOP MENU] to call up the title menu.
2
3 4